Ariel Salaverria Custom Knives Ariel Salaverria Custom Knives - San Mai and Cable Damascus Custom Knives - Knifemaking Tutorials
  Home   About Me   Available   Knives   Jewelry   EDC Tools   Lanyard Beads   Tutorials   Knifemaking   Ordering   Contact  
Currently taking orders for: Jewelry, EDC Tools and Lanyard Beads Subscribe to the Ariel Salaverria Custom Knives Newsletter
#18 - #17 - #16 - #15 - #14 - #13 - #12 - #11 - #10 - #9 - #8 - #7 - #6 - #5 - #4 - #3 - #2 - #1
 
Tutorials - Making Fullers on Blades
A little device I made to make symetric and/or parallel fullers on blades.
I was making a custom ordered blade and I messed up, so I built this in 20 mins with ordinary pieces. Probably there's already something similar in the US market, but maybe this low tech solution can help someone. (Picture 1)

For this blade, I used a 3mm cutting disk on a bench grinder. (Pictures 2 and 3)

Then the other side. In this particular case, I didn't care for scratches as I'd still had to mirror polish the blade, but you can use a piece of clothing or rubber between the blade and the screws to avoid them. (Picture 4)
Tutorials - Making Fullers on Blades   Tutorials - Making Fullers on Blades   Tutorials - Making Fullers on Blades   Tutorials - Making Fullers on Blades   blank image   blank image   blank image   blank image
Picture 1   Picture 2   Picture 3   Picture 4                
Finished Blade
Tutorials - Making Fullers on Blades   blank image   blank image   blank image   blank image   blank image   blank image   blank image
#18 - #17 - #16 - #15 - #14 - #13 - #12 - #11 - #10 - #9 - #8 - #7 - #6 - #5 - #4 - #3 - #2 - #1
 
  Home   About Me   Available   Knives   Jewelry   EDC Tools   Lanyard Beads   Tutorials   Knifemaking   Ordering   Contact  
Subscribe to the Ariel Salaverria Custom Knives Newsletter AES Custom Knives - Copyright 2004-2017 - Website by NsB